Bambu Cool Plate SuperTack Pro
1-3 arkipäivää
What Makes it Pro?
25% Longer Lifespan
10% Lower Operating Temperature
Better Scratch Resistance
Say Goodbye to Print Failures
SuperTack Pro coating provides ultra-strong adhesion to PLA and PETG filaments, even at lower heatbed temperatures. It enhances printing success by eliminating adhesion issues, reduces warping when printing large objects, and works well with bad shape surface.
Reduces Warping when Printing Large Objects
The Surface is in Bad Shape? No Problem!
Smooth & Natural Surface Finish
The SuperTack Pro coating can impart a smooth and matte texture to the bottom surface of the printed object, better blend-in with other surfaces.
Energy Saving
The SuperTack Pro coating requires only an extremely low heatbed temperature to ensure secure adhesion. This saves a significant amount of energy, leading to lower power bills and planet protection.
Comparison of Heatbed Temperatures
| Materials | Heatbed temperature with SuperTack | Heatbed temperature with SuperTack Pro |
| PLA | 45℃ | 40℃ |
| PETG | 70℃ | 60℃ |
How to remove prints from SuperTack Pro
Use the scraper included with your printer to gently lift the print, then pry it off carefully. If the print is sticking too tightly, heat the plate on the heatbed to 50°C to assist with removal.
Considerations
- Use the scraper included with your printer to gently lift the print, then pry it off carefully. If the print is sticking too tightly, heat the plate on the heatbed to 50°C to assist with removal. The surface is soft. Be careful when using a scraper to remove printed parts.
- Because the Vortek hotend rack occupies additional space, the H2C print bed is slightly smaller than the H2D. Therefore, The H2C and H2D build plates differ in size. Please ensure you select the correct model when purchasing.
- Do NOT print with TPU filament, as it will damage the build plate.
- Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.
- For X1 series, P1 series, and A1 printers, before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle. The coating in the special-designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime.
- Bambu Cool Plate SuperTack Pro is considered a consumable part. The warranty covers manufacturing defects, not cosmetic damage like scratches, dents, or cracks.
- SuperTack Pro provides good adhesion without adhesive. Clean the surface with water and dish soap if heavy dirt appears. Do NOT use organic solvents (especially acetone) as it will damage the surface.
- Bambu PLA Silk+ is supported. Other PLA Silk materials exhibit strong adhesion which may damage printed models. We do not recommend other PLA Silk materials except Bambu PLA Silk+.
Installation Steps for X1 Series/P1 Series/A1
Step 1: Align plate with fixed points.
Step 2: Secure to magnetic platform.
Installation Steps for H2 Series
Step 1: Align with platform fixed points.
Step 2: Secure to magnetic platform.
Product Specifications
| Material | Specially Designed Coating / Spring Steel Plate |
| Thickness | Coating: 0.05mm | Steel Plate: 0.4mm |
| Temperature Resistance | Up to 120℃ |
| Usable Print Size | X1C/P1P/P1S/A1/P2S: 256*256mm H2D/H2S: 350*320mm H2C: 330*320mm |
Toimitus: Toimitamme tilaukset suoraan Suomen varastoltamme. Arvioitu toimitusaika on 1–3 arkipäivää. Toimituskulut alkaen 6,99 € (ilmainen toimitus yli 100 € tilauksille).
Palautusoikeus: Sinulla on Suomen kuluttajasuojalain mukainen 14 vuorokauden palautusoikeus tuotteen vastaanottamisesta. Huomioithan, että filamenttien kohdalla palautusoikeus koskee vain avaamattomia ja alkuperäisessä tyhjiöpakkauksessa (vakuumissa) olevia tuotteita.
Palautusilmoitus: Sinun on ilmoitettava palautuksesta sähköpostitse ennen tuotteen lähettämistä, erityisesti jos:
- Olet saanut väärän tuotteen.
- Tuote tai pakkaus on vaurioitunut kuljetuksen aikana.
- Tuotteessa on valmistusvirhe.
- Toimitus on merkittävästi myöhässä luvatusta ajasta.
Tuotteen kunto: Palautettavan tuotteen tulee olla alkuperäisessä pakkauksessaan, käyttämätön ja vahingoittumaton. Tuote on pakattava huolellisesti (mieluiten samaan pahvilaatikkoon, jossa se toimitettiin), jotta se ei vaurioidu paljetusmatkalla.